A few things I've been working on or recently acquired.
![Image](https://live.staticflickr.com/65535/53521069284_8f1900e95a.jpg)
![Image](https://live.staticflickr.com/65535/53521070374_cf40b66c65.jpg)
Oil bottle and Khazad axe puck in belt pounches, these are some of my first forays into wet-moulding and tooling.
![Image](https://live.staticflickr.com/65535/53521181005_9f3b6b5021.jpg)
An 'old' coin purse, reused to hold nails of three different sizes, the medium ones are rose-heads from an old hardware shop I found on ebay. The big one is handmade and I've had it for a few years...... I can't remember exactly how it came to me though.
![Image](https://live.staticflickr.com/65535/53520917403_8eb0cd2eb1.jpg)
Folding melting spoon for lead,tin and other soft metals. Shown folded in the first photo
![Image](https://live.staticflickr.com/65535/53521182000_892c44842a.jpg)
Detail of the filework on the handle
![Image](https://live.staticflickr.com/65535/53519858777_5c5d6be635.jpg)
Detail of the bowl and one way hinge.
![Image](https://live.staticflickr.com/65535/53521181310_e7cfec9238.jpg)
A 'new' coin purse being used for its intended service, next to it is a small silver box I picked up recently and one of the coins Elleth sent me last year as part of my Yule gift.
Other things in the top photo are:
Two pairs of shears, I'm not sure which ones I like the best yet..... Both of them needed fettling to make them cut cleanly.
Serpentine awl, this has a square point at one end (for drilling small holes) and a flat cutting point at the other for piercing leather.
Small steel Penannular I forged when I was 16 or so.
Big sack needle (drilling and filing the eye was not easy)
Plummet (this one is forged from tin with a lead tip because I don't really want to handle lead too much)
Stick of tin solder
Two octagonal beeswax candles