Eriador quiver "kit" - any interest?
Moderator: caedmon
- Elleth
- êphal ki-*raznahê
- Posts: 2945
- Joined: Wed Nov 03, 2010 5:26 am
- Location: in the Angle; New England
Eriador quiver "kit" - any interest?
SOLD
So some might remember my Quiver of Eriador.
For reasons, I ended up making most of the parts for *two* quivers - and the second has been laying half finished ever since:
Same walnut tanned dubbined vegtan leather, same custom bronze hardware.
It doesn't have the cargo straps that go around the quiver body, but I can include buckles for those, and a nice partially sewn wool tube for an arrow sock, along with enough heavy linen thread to finish the job.
Likewise some linen cord and a toggle for the drawstring.
Quiver is SOLD.
So some might remember my Quiver of Eriador.
For reasons, I ended up making most of the parts for *two* quivers - and the second has been laying half finished ever since:
Same walnut tanned dubbined vegtan leather, same custom bronze hardware.
It doesn't have the cargo straps that go around the quiver body, but I can include buckles for those, and a nice partially sewn wool tube for an arrow sock, along with enough heavy linen thread to finish the job.
Likewise some linen cord and a toggle for the drawstring.
Quiver is SOLD.
Last edited by Elleth on Mon Jul 06, 2020 1:21 pm, edited 4 times in total.
Persona: Aerlinneth, Dúnedain of Amon Lendel c. TA 3010.
- Taylor Steiner
- Haeropada
- Posts: 989
- Joined: Mon Apr 16, 2018 7:31 pm
- Location: Great Falls Montana
- Contact:
Re: Eriador quiver "kit" - any interest?
Oh man, that's gorgeous, and extremely tempting. I'm planning one or even two new quiversnfor myself soon in any event, but I'll likely be going with my own design. I'm particularly envious of the leathetr and the hardware, but perhaps I can talk to you a bit about those things when the time comes for my new one. Meanwhile I hope some lucky ranger snatches this up quick!
Maerondir Perianseron, also called “Mickel,” Halfling Friend - Ranger of the Misty Mountains
-
- Wayfarer
- Posts: 27
- Joined: Sun Feb 19, 2023 3:47 pm
- Location: Hobbs, NM, USA
- Contact:
Re: Eriador quiver "kit" - any interest?
i see that this second quiver is sold, but i would LOVE the pattern for it!! am a craftsperson myself and building out my kit is tons of fun but my quiver is far over built for this get-up and if i could build your version, id fit right in!! the snapsak look awesome too, and i'd love a pattern for it as well!! this forum is exatly what i have been after, though it appears mostly unused now
- Elleth
- êphal ki-*raznahê
- Posts: 2945
- Joined: Wed Nov 03, 2010 5:26 am
- Location: in the Angle; New England
Re: Eriador quiver "kit" - any interest?
Welcome, it's great to see a new face!
You'll find more pictures of the pattern pieces and some assembly lessons learned on the original thread, here:
http://middleearthrangers.org/forum/vie ... =27&t=3749
Will that serve?
Good luck!
You'll find more pictures of the pattern pieces and some assembly lessons learned on the original thread, here:
http://middleearthrangers.org/forum/vie ... =27&t=3749
Will that serve?
Good luck!
Persona: Aerlinneth, Dúnedain of Amon Lendel c. TA 3010.
-
- Wayfarer
- Posts: 27
- Joined: Sun Feb 19, 2023 3:47 pm
- Location: Hobbs, NM, USA
- Contact:
Re: Eriador quiver "kit" - any interest?
going to look, lesse!! still getting used to the forums ways...Elleth wrote: ↑Tue Feb 21, 2023 12:36 pm Welcome, it's great to see a new face!
You'll find more pictures of the pattern pieces and some assembly lessons learned on the original thread, here:
http://middleearthrangers.org/forum/vie ... =27&t=3749
Will that serve?
Good luck!
-
- Wayfarer
- Posts: 27
- Joined: Sun Feb 19, 2023 3:47 pm
- Location: Hobbs, NM, USA
- Contact:
Re: Eriador quiver "kit" - any interest?
doesn't look too difficult, but im terrible at measurements guesstimation. the urthgard thread images vanished so that may be the only 'pattern pic' there is if your pattern is lost in limbo (as many of mine usually are).
- Elleth
- êphal ki-*raznahê
- Posts: 2945
- Joined: Wed Nov 03, 2010 5:26 am
- Location: in the Angle; New England
Re: Eriador quiver "kit" - any interest?
I'm pretty sure I still have the posterboard in my patterns box - I'll look for it and post some basic measurements this weekend.
In the meantime, this at least shows you all the pieces for two quivers, plus a spare spine. (I forget why I cut an extra one):
dimensions added to original post:
viewtopic.php?p=54961#p54961
edit - I remember now why I cut an extra spine: also noted in original post so its easier to find.
In the meantime, this at least shows you all the pieces for two quivers, plus a spare spine. (I forget why I cut an extra one):
dimensions added to original post:
viewtopic.php?p=54961#p54961
edit - I remember now why I cut an extra spine: also noted in original post so its easier to find.
Persona: Aerlinneth, Dúnedain of Amon Lendel c. TA 3010.