Pictures of your ranger kit
- mcapanelli
- Haeropada
- Posts: 757
- Joined: Sat Feb 16, 2008 1:48 pm
- Location: New York, New York
- Contact:
Pictures of your ranger kit
Hey all,
Well like the subject states, I think it be great if we posted pictures of our ranger related items. I'm not exactly how to post pictures here but hey, there's always photobucket! Anyway here's a picture of my sword. It's a Christian Fletcher Boaderwatch with an Albion XVI blade. The scabbard was made by Russ Ellis of Tritonworks.
http://img385.imageshack.us/img385/2192/1004062im5.jpg
http://img371.imageshack.us/img371/7438/1004053vz0.jpg
Well like the subject states, I think it be great if we posted pictures of our ranger related items. I'm not exactly how to post pictures here but hey, there's always photobucket! Anyway here's a picture of my sword. It's a Christian Fletcher Boaderwatch with an Albion XVI blade. The scabbard was made by Russ Ellis of Tritonworks.
http://img385.imageshack.us/img385/2192/1004062im5.jpg
http://img371.imageshack.us/img371/7438/1004053vz0.jpg
Winter is coming
- Peter Remling
- Athel Dunedain
- Posts: 3748
- Joined: Sat Feb 16, 2008 4:20 am
- mcapanelli
- Haeropada
- Posts: 757
- Joined: Sat Feb 16, 2008 1:48 pm
- Location: New York, New York
- Contact:
The byknife is actually from the UC strider scabbard. We just polished her up a bit. I used just a rag and some metal glo and really not much elbow grease at all. I tried to remove the UC logo but I think I'll need to take her in to the shop and run the buffing wheel. Not sure if it's worth it though because it really is a very nice knife and I'd hate to ruin her.
Winter is coming
- Peter Remling
- Athel Dunedain
- Posts: 3748
- Joined: Sat Feb 16, 2008 4:20 am
- Peter Remling
- Athel Dunedain
- Posts: 3748
- Joined: Sat Feb 16, 2008 4:20 am
Well, let's see if I can get linked to my picasa album here. One pic of the unsheathed sword didn't make it into the album for some reason.
Here goes nothing:
http://picasaweb.google.com/ecart1970/RangerGear
Here goes nothing:
http://picasaweb.google.com/ecart1970/RangerGear
- mcapanelli
- Haeropada
- Posts: 757
- Joined: Sat Feb 16, 2008 1:48 pm
- Location: New York, New York
- Contact:
- mcapanelli
- Haeropada
- Posts: 757
- Joined: Sat Feb 16, 2008 1:48 pm
- Location: New York, New York
- Contact:
The Tinker isn't finished yet. Tink's engraver is broken and the parts are on backorder. So once he gets the parts, the sword will go back to him for finishing. But I'm very well pleased with it as is. The scabbard is Tinker's too. The shirt is left over from my old Civ War reenacting days. I dyed it and its companion along with one my mother made with dark green RIT dye. But I'm working on my sewing skills to make my own. The pants are from MRL. Hoping to come up with something more thorn-resistant in the near future . The belt is my first piece of leather work, besides the boots I'm wearing, in 25 years. I have to get the hang of it again. I noticed the pic of the star on the belt didn't come out that well. I may try that one again. I made the cloak. There is a cloak pin that I was wearing. I forged it. I have to get a good pic of it. It and one other pin were supposed to go to Andy for field testing, but I never sent them off and now he's kinda inconvenienced at the moment. I will be working on a new scabbard for the sword before too long, something more suitable for a ranger sword.
Pete has plenty of knives and swords in those pics that I would love to hang by my side.
Pete has plenty of knives and swords in those pics that I would love to hang by my side.
- Peter Remling
- Athel Dunedain
- Posts: 3748
- Joined: Sat Feb 16, 2008 4:20 am
Hi Guys:
All three of the daggers in the first daggers and knives pic, are Windlass the steel sword hilt I just bought from PhilD and only rec'd it last Thursday. The middle dag with the mermaid motif, I bought for my daughter Jessie. She has a pirate outfit with a cutlass that she goes to the Renfair in. The third in the pic is their brass hilted version. The dagger in the kangeroo sheath attached to the 1520 in the backpack pic is another Windlass.
I've had a number of daggers through the years incuding many custom pieces but the Windlass' blades are the best for the price. If you look around enough you never have to pay full list on them either.
The Ravensclaw and the Mermaid dagger are the only ones I havn't sharpened. The Ravensclaw as a lefthand weapon with a tomahawk or medium sized handaxe would make a very well matched team.
I too, have never handled a Tink. She looks sweet though.
All three of the daggers in the first daggers and knives pic, are Windlass the steel sword hilt I just bought from PhilD and only rec'd it last Thursday. The middle dag with the mermaid motif, I bought for my daughter Jessie. She has a pirate outfit with a cutlass that she goes to the Renfair in. The third in the pic is their brass hilted version. The dagger in the kangeroo sheath attached to the 1520 in the backpack pic is another Windlass.
I've had a number of daggers through the years incuding many custom pieces but the Windlass' blades are the best for the price. If you look around enough you never have to pay full list on them either.
The Ravensclaw and the Mermaid dagger are the only ones I havn't sharpened. The Ravensclaw as a lefthand weapon with a tomahawk or medium sized handaxe would make a very well matched team.
I too, have never handled a Tink. She looks sweet though.
At 2.75 lbs, I think the Tinker is just as heavy as my Clontarf. But the weight is distributed differently and it feels much lighter in the hand. I'll have to get some specs on it soon. When the engraving is done, I'll post new pics.
The pommel will have a shield engraved into it while on one side of the blade will be my name in Greek characters. The other side will say in Greek, Knights of Ichthus . If you can decifer my poor picture taking, you may see the ichthus, or fish, motif in the belt I made. I'll explain if anyone is interested.
The pommel will have a shield engraved into it while on one side of the blade will be my name in Greek characters. The other side will say in Greek, Knights of Ichthus . If you can decifer my poor picture taking, you may see the ichthus, or fish, motif in the belt I made. I'll explain if anyone is interested.
- mcapanelli
- Haeropada
- Posts: 757
- Joined: Sat Feb 16, 2008 1:48 pm
- Location: New York, New York
- Contact:
Well finally I have pictures of my full kit, or at least my kit so far
Linen tunic, wool pants
Clothes on hanger with a combanation over tunic/cape made by Diane Mirro
Front view
Back view
Boots by Sodhoppers
Backpack with cloak case (Thanks again Pete!!)
Sword/utility belt, water skin, a misc pouch.
A&A Friedrich Spear
Close up of spear detail
Bamboo backed Epee Flatbow
Close up of bow
Single handed sword and hand axe. These are my standard carry weapons
And for the larger engagements, my longsowrd......
Linen tunic, wool pants
Clothes on hanger with a combanation over tunic/cape made by Diane Mirro
Front view
Back view
Boots by Sodhoppers
Backpack with cloak case (Thanks again Pete!!)
Sword/utility belt, water skin, a misc pouch.
A&A Friedrich Spear
Close up of spear detail
Bamboo backed Epee Flatbow
Close up of bow
Single handed sword and hand axe. These are my standard carry weapons
And for the larger engagements, my longsowrd......
Winter is coming
Modified CS Poleax = Ranger Axe
Last year I got a Cold Steel Poleaxe in the closeout section.
This thing was really nice, but it was big, heavy, came with a 5' shaft... and completely impractical. Seriously, when would I ever wield a poleaxe? Even in a home defense situation, it's too big to use indoors. And I can't see this weapon as something I'd go inside of the house to grab and bring outside, either.
So, off to the workshop I went.
The first thing I did was examine the head to see what I could cut off and make more practical. The head has a huge pole on the back and continues down the haft in a cylinder. This is a picture of the head- all drop forged as one piece:
I made the following cuts, shown in orange lines:
That left me with something big, but much nicer and more wieldy:
While I like a lot of things about Cold Steel, I absolutely hate... hate the black coating they put on a lot of their weapons. So, with a combination of a wire brush, scotchbrite pad, and sandpaper, I got most of that stuff off. While I dislike the black coating, I often don't necessarily prefer shiny bright things. I love old things with patina that look like they've been around for a century but well-cared for. I boiled the head and langettes in a large pot on the stove using a secret patina formula which I've developed over the years. It gives it a nice, rich gray color.
I made a new handle out of an ash shaft, which I stained dark and distressed slightly.
And sealed the head with the screw which came in the original package, a wood wedge, and some gorilla glue. It's nice and solid.
Though I cut off the main hammer poll, it still has a substantial poll on the back.
I worked on the edge, drawing it back and finishing it off with a mirror polish for better cutting ability.
Now it's good enough to actually use. Even if it's a bit on the large side, it's plausible for the modern world, yet stout enough for a Ranger of the North to carry as weapon or tool when striding through the hills and woods of Eriador.
This thing was really nice, but it was big, heavy, came with a 5' shaft... and completely impractical. Seriously, when would I ever wield a poleaxe? Even in a home defense situation, it's too big to use indoors. And I can't see this weapon as something I'd go inside of the house to grab and bring outside, either.
So, off to the workshop I went.
The first thing I did was examine the head to see what I could cut off and make more practical. The head has a huge pole on the back and continues down the haft in a cylinder. This is a picture of the head- all drop forged as one piece:
I made the following cuts, shown in orange lines:
That left me with something big, but much nicer and more wieldy:
While I like a lot of things about Cold Steel, I absolutely hate... hate the black coating they put on a lot of their weapons. So, with a combination of a wire brush, scotchbrite pad, and sandpaper, I got most of that stuff off. While I dislike the black coating, I often don't necessarily prefer shiny bright things. I love old things with patina that look like they've been around for a century but well-cared for. I boiled the head and langettes in a large pot on the stove using a secret patina formula which I've developed over the years. It gives it a nice, rich gray color.
I made a new handle out of an ash shaft, which I stained dark and distressed slightly.
And sealed the head with the screw which came in the original package, a wood wedge, and some gorilla glue. It's nice and solid.
Though I cut off the main hammer poll, it still has a substantial poll on the back.
I worked on the edge, drawing it back and finishing it off with a mirror polish for better cutting ability.
Now it's good enough to actually use. Even if it's a bit on the large side, it's plausible for the modern world, yet stout enough for a Ranger of the North to carry as weapon or tool when striding through the hills and woods of Eriador.
"The world is grown so bad, that wrens make prey where eagles dare not perch."
-Shakespeare, Richard III
-Shakespeare, Richard III